Search

    Damp-proof course DELTA®-PROTEKT

    Bitumen-resistant wall barrier made of EVA that is fleece-laminated on both sides. Usable as a horizontal cross-section seal in single-shell, as an L or Z barrier in double-shell masonry (application type MSB-Q) or as in timber frame construction.

    01 /03
    smallRetina 03:21:43 mediumAlias 03:21:43 large 03:21:43 xlarge 03:21:43
    DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre
    smallRetina 03:21:43 mediumAlias 03:21:43 large 03:21:43 xlarge 03:21:43
    DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre
    smallRetina 03:21:43 mediumAlias 03:21:43 large 03:21:43 xlarge 03:21:43
    DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre
      smallRetina 03:21:43
      DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre
      smallRetina 03:21:43
      DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre
      smallRetina 03:21:43
      DELTA®-PROTEKT in der Anwendung als Mauerwerkssperre

    Advantages

    • Compliance with standards
      DELTA®-PROTEKT is compliant with the requirements of the DIN 18533 waterproofing standard for wall barriers in water exposure class W4-E.
    • Slip-resistant
      The double-sided fleece surface provides a very good “clawing” of the masonry mortar. DELTA®-PROTEKT is therefore part of the application type MSB-Q.
    • Low weight
      Even with the same thickness, DELTA®-PROTEKT is only half as heavy as PVC wall barrier membranes. This makes the processing easier.
    • Robust
      The multi-layer composite material provides excellent tear resistance and high perforation security. Lasts - even on rough construction sites!
    • Versatile
      DELTA®-PROTEKT is made to be used as a cross-section seal, as an L and Z barrier in double-shell masonry as well as in timber frame construction.
    • Bitumen resistance
      The bitumen resistance enables a connection to all common sealing systems.

    Application

    In single-shell masonry, DELTA®-PROTEKT is inserted into the bed joints as a horizontal seal against ascending humidity. DELTA®-PROTEKT is installed in mortar on both sides between the floor and the first layer of stone.

    In double-shell masonry, DELTA®-PROTEKT is used as an L or Z barrier on the masonry base and in the area of window parapets and lintels.

    DELTA®-PROTEKT, in the case of timber frame construction, is good as a cross-section seal under the sill timber and as an L-barrier in double-shell constructions.

    Technical data

    Material Ethylene vinyl acetate terpolymer (EVA). Laminated on both sides with a PP spunbonded fabric.
    Colour grey
    Surface coarse
    Thickness approx. 1,2 mm
    Tear resistance (nail shaft) (EN 12310-1) lengthways: approx. 350 N, crosswise: approx. 350 N
    Resistance to folding at low temperatures (EN 495-5) -20 °C no break, no cracks
    Watertightness (EN 1928, Procedure B) passed (400 kPa/72 h)
    Reaction to fire (EN 13501-1) Fire class E
    Resistance bitumen resistant
    Widths 17,5 / 24 / 25 / 30 / 36,5 / 50 / 60 / 75 / 100 cm
    Widths 25 m
    Application type (DIN SPEC 20000-202) MSB-Q
    Water exposure class (DIN 18533) W4-E
    Room usage class (DIN 18533) RN1-E to RN3-E
    Crack class (DIN 18533) R1-E to R4-E

    Accessories

    smallRetina 03:21:43 mediumAlias 03:21:43
    DELTA®-THAN Anschluss am Kamin

    DELTA®-THAN

    Permanent elastic cartridge adhesive for outdoor use. Offers maximum security in the connection area.
    smallRetina 03:21:44 mediumAlias 03:21:44
    DELTA®-MWSP Clip in der Anwendung

    DELTA®-MWSP Clip

    Fastening clip for L-shaped barriers in double-skinned facing masonry.
    smallRetina 03:21:44 mediumAlias 03:21:44
    DELTA®-MAUERWEKSECKE Außenecke in der Anwendung

    DELTA®-MAUERWERKSECKE (Corner)

    Prefabricated inside and outside corners as a system supplement for all DELTA® damp-proof courses.

    Download

    PDF | 163.5 kB

    Declaration of Performance DELTA®-PROTEKT

    Contact

    smallRetina 03:21:44 mediumAlias 03:21:44 large 03:21:44 xlarge 03:21:44

    Would you like information on detailed product properties, use cases or other technical topics?
    Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

    Do you have questions about prices, availability or the status of your order?
    Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.