First define the assembly line in adjustments to the later terrain height. After that, mark the fastening point of the clip approximately 2 cm above the upper edge of the membrane.
The clip is fixed by means of washer head nails, knock-in dowels (5 mm diameter), etc. Detach the fleece a hand's width from the dimpled sheet and then pull DELTA®-GEO-DRAIN Quattro/ DELTA®-TERRAXX behind the clip. The lateral readjustment is very easy to be carried out.
When using the DELTA®-NOPPENBAHNEN-PROFIL you have to ensure that the individual clips are installed exactly in one line. The upper end with the DELTA®-NOPPENBAHNEN-PROFIL is then possible without any further fastening: Simply snap into the DELTA®-GEO-DRAIN Clip, done.
An L-shaped plaster finishing rail is recommended as the lower end for the subsequent plinth plaster.
|Material||Impact-resistant, extremely stable polyamide|
|Fastening point||approximately 2 cm above the upper edge of DELTA®-GEO-DRAIN QUATTRO|
|Fastening distance||Installation depth up to 2.60 m = 60-70 cm. In case of greater installation depths, the fastening distance is to be reduced accordingly.|
|Functional area||126 mm long, width of 55 mm|
Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or email@example.com.
Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or firstname.lastname@example.org.