Façade membrane for open joints DELTA®-FASSADE 50 (PLUS)

Diffusion-open façade membrane for open façades including up to 50 mm wide joints and a maximum joint proportion of 50% of the surface.

It is also suitable for metal and wooden stand constructions as it offers reliable protection of the façade against wind as well as moisture.

    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS in der Anwendung hinter einer Holzfassade
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS in der Anwendung hinter einer Holzfassade
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS in der Anwendung
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS in der Anwendung
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS in der Anwendung
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS Illustration mit Holzfassade
    smallRetina 12:34:32
    DELTA®-FASSADE 50 PLUS Illustration mit Glasfassade

Advantages

  • Permanently UV-resistant
    The excessive UV exposure may result in material fatigue or embrittlement of the material and impair the protective function of the façade membranes. Thanks to a special coating, with the product DELTA®-FASSADE 50 (PLUS) you will benefit from a permanent UV resistance and will also be protected from such damage.
  • Flame retardant
    The product DELTA®-FASSADE 50 (PLUS) meets the requirements of the Euro fire class B-s1, d0. This is the highest class of flame-retardant membranes and means that in the event of a fire, it does not drip off and only causes a low level of smoke. This way you can guarantee the protection of houses and residents.
  • Vapour permeability
    The SD value of the membrane of only approximately 0.02 m guarantees the vapour permeability from the inside. This guarantees the functional reliability of the structure as well as a permanently dry thermal insulation.

Reference

Technical data

Material Specially coated, highly tear-resistant polyester fleece with a waterproof plastic coating and with adhesive zones placed on both edges. DELTA®-FASSADE 50 without adhesive zones.
Suitability For open façades with up to 50 mm wide joints and a maximum of joint proportion of 50% of the surface.
Reaction to fire B-s1,d0, according to EN 13501-1
Tensile strength approx.. 370/270 N/5 cm, EN 12311-1+2
Watertightness Watertight W 1, EN 13859-1+2
Sd-value approx. 0,02 m
Servicetemperature range from -40 °C to +80 °C
Moisture resistance factor approx. 0,028 m²hPa/mg
Weight approx. 270 g/m²
Roll weight approx. 20 kg
Roll size 50 m x 1.50 m

Accessories

Contact

smallRetina 12:34:34 mediumAlias 12:34:34 large 12:34:34 xlarge 12:34:34

Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.