Ridge and arris roll made of continuous, highly tear-resistant aluminium with a high ventilation cross-section of approx. 220 cm²/m. Enamelled on both sides.
DELTA®-ALU ROLL can be easily aligned and attached thanks to the product name printed on it. It can be ideally adapted to the covering material thanks to the high material expansion in the edge strips.
The ridge and hip roll can be applied in just a few steps:
Cover the arris/ridge tiles. Done!
|Field of Application||For a safe connection between roof tiles and roof stones when covering.|
|Ventilation air gap||approx. 220 cm²/m|
|Servicetemperature range||from -30 °C to +80 °C|
|Application temperature||from +5 °C to +40 °C|
|Material||Highly tear-resistant aluminium, coated on both sides and stove-enamelled. Butyl adhesive strips on both edges.|
|Stretchability margin||by pleating approx. 30%|
|Substrate condition||Load-bearing, dry, free of grease, frost and dust|
|Roll width||300 mm, 380 mm|
|Roll length||5 m|
Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or email@example.com.
Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or firstname.lastname@example.org.