Search

    Ridge and arris roll DELTA®-VENT ROLL PRO

    Ridge and arris roll with an innovative combination of materials for highly functional ventilation.
    The special fireproof aluminum wire mesh in the middle section is weather, corrosion and permanently UV resistant.

    01 /03
    smallRetina 08:37:42 mediumAlias 08:37:42 large 08:37:42 xlarge 08:37:42
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
    smallRetina 08:37:42 mediumAlias 08:37:42 large 08:37:42 xlarge 08:37:42
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
    smallRetina 08:37:42 mediumAlias 08:37:42 large 08:37:42 xlarge 08:37:42
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
      smallRetina 08:37:43
      DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
      smallRetina 08:37:43
      DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
      smallRetina 08:37:43
      DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle

    Advantages

    • Long term corrosion resistance
      The resistance of the metals used, tested under off-shore conditions according to VDA 621, ensures the long-term ventilation function.
    • High ventilation cross section
      The particularly high ventilation cross-section of approx. 650cm²/m ensures ventilation of the level below the roofing in accordance with the roofing rules.

    Application

    DELTA®-VENT ROLL PRO can be easily aligned and fastened thanks to the product name printed on it. Due to the high material stretch in the edge strips, it can also be optimally adapted to the covering material.

    The ridge and arris roll is laid in just a few steps:

    • Selection of the roll width depending on the profiling of the cover material.
    • The substrate must be dry and dust-free when laying. (In the case of old roof tiles / concrete roof tiles, prime with DELTA®-HF PRIMER if necessary)
    • Roll out the DELTA®-VENT ROLL PRO and fasten it to the ridge/ridge batten.
    • Pull off the backing strip and press on the adhesive strip in the edge area.
    • Cover arris/ridge tiles. Ready!

    Technical data

    Field of Application For a secure connection between roof tiles and roofing stones to cover ridges or gaps.
    Ventilation air gap approx. 650cm²/m
    Servicetemperature range from -30 °C to +80 °C
    Application temperature from +5 °C to +40 °C
    Material Highly tear-resistant aluminum (edge ​​area). Highly corrosion-resistant, fire-resistant aluminum fabric (central area). Butyl adhesive strips on both edges.
    Stretchability margin through special pleating approx. 50%
    Substrate condition Stable, dry, free of grease, frost and dust
    Roll width 240 mm, 310 mm, 380 mm
    Roll length 5 m
    Packaging 4 rolls
    Colours black, red, brown

    Contact

    smallRetina 08:37:43 mediumAlias 08:37:43 large 08:37:43 xlarge 08:37:43

    Would you like information on detailed product properties, use cases or other technical topics?
    Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

    Do you have questions about prices, availability or the status of your order?
    Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.

    Contact form

    You can also use our contact form to send us your request.

    International contact

    Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.