Seperation layer DELTA®-ENKA VENT

Structural mat without carrier track for roofs with non-self-supporting metal coverings.

Available as DELTA®-TRELA (PLUS) equipped with a carrier track.

    smallRetina 05:59:50
    DELTA®-ENKA VENT in der Anwendung
    smallRetina 05:59:50
    DELTA®-ENKA VENT in der Anwendung

Vantaggi

  • Flexible application
    DELTA®-ENKA VENT may be used in combination with all DELTA® formwork tracks.
  • The tested fire protection
    DELTA®-ENKA VENT is tested in combination withDELTA®-FOXX (PLUS) as a roofing system resistant to flying sparks and radiant heat with metal coverings made of titanium zinc (AbP P-BWU03-I-16.3.243 MPA University of Stuttgart)
  • Low frictional resistance
    Due to the high density of the nub structure, the shares can slide without any hindrance in case of thermal changes in length.

Applicazione

The DELTA®-ENKA VENT can be laid on the separating layer (hard sheathing) into all directions.

Dati Tecnici

Material Polyamide
Dimple height approx. 8 mm
Deck width approx. 1 m
Weight approx. 210 g/m²
Roll weight approx. 10,5 kg
Roll size 50 m x 1,0 m

Contatti

smallRetina 05:59:50 mediumAlias 05:59:50 large 05:59:50 xlarge 05:59:50

Hai domande su  disponibilità o sullo stato del tuo ordine?
Il nostro servizio di vendita ti aiuterà al numero +39 0354201111 oppure alle mail  trottoli@doerken.it o mbonfanti@doerken.it

Vuoi avere un preventivo , conoscere i prezzi o dettagli tecnici? Contatta i nostri agenti-tecnici in base alla zona di competenza