Ridge and arris roll DELTA®-VENT ROLL PRO

Ridge and arris roll with an innovative combination of materials for highly functional ventilation.
The special fireproof aluminum wire mesh in the middle section is weather, corrosion and permanently UV resistant.

    smallRetina 03:31:00
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
    smallRetina 03:31:00
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle
    smallRetina 03:31:00
    DELTA®-VENT ROLL PRO in der Anwendung als Firstrolle

Avantajlar

  • Long term corrosion resistance
    The resistance of the metals used, tested under off-shore conditions according to VDA 621, ensures the long-term ventilation function.
  • High ventilation cross section
    The particularly high ventilation cross-section of approx. 650cm²/m ensures ventilation of the level below the roofing in accordance with the roofing rules.

Uygulama bilgileri

DELTA®-VENT ROLL PRO can be easily aligned and fastened thanks to the product name printed on it. Due to the high material stretch in the edge strips, it can also be optimally adapted to the covering material.

The ridge and arris roll is laid in just a few steps:

  • Selection of the roll width depending on the profiling of the cover material.
  • The substrate must be dry and dust-free when laying. (In the case of old roof tiles / concrete roof tiles, prime with DELTA®-HF PRIMER if necessary)
  • Roll out the DELTA®-VENT ROLL PRO and fasten it to the ridge/ridge batten.
  • Pull off the backing strip and press on the adhesive strip in the edge area.
  • Cover arris/ridge tiles. Ready!

Teknik veriler

Field of Application For a secure connection between roof tiles and roofing stones to cover ridges or gaps.
Ventilation air gap approx. 650cm²/m
Servicetemperature range from -30 °C to +80 °C
Application temperature from +5 °C to +40 °C
Material Highly tear-resistant aluminum (edge ​​area). Highly corrosion-resistant, fire-resistant aluminum fabric (central area). Butyl adhesive strips on both edges.
Stretchability margin through special pleating approx. 50%
Substrate condition Stable, dry, free of grease, frost and dust
Roll width 240 mm, 310 mm, 380 mm
Roll length 5 m
Packaging 4 rolls
Colours black, red, brown

İletişim

smallRetina 03:31:00 mediumAlias 03:31:00 large 03:31:00 xlarge 03:31:00

Dörken Sistem head office / Dörken Sistem merkez ofis

Sanayi Mahallesi D-130 Yanyol Caddesi No: 179 İzmit / KOCAELİ / TÜRKİYE

Tel: +90 262 335 6116

Fax: +90 262 335 6117

E-mail: info@doerken-sistem.com

For your technical questions / Ürünlerimizle ilgili teknik sorularınız için

E-mail: teknik@doerken-sistem.com

For our export department / İhracat departmanımıza doğrudan ulaşabilirsiniz

export@doerken-sistem.com