Economical sarking and waterproofing sheet for hip roofs. Up to 30% savings in time and material
Thanks to the adhesive strips under both edges of the sheet, DELTA®-MAXX WD may be laid out more efficiently and considerably faster than conventional sarking sheets. From left to right and from right to left without loss of time. At once, the roof will be safely covered and perfectly protected from the weather. As the material may be cut precisely to size around hips and valleys, no material is wasted unnecessarily. Work on a roll that has been cut obliquely may continue without delay. In this way, DELTA®-MAXX WD saves any amount of time and material costs.
Along ridges, the sarking sheet may be folded over and glued in position without any additional gluing being needed. Excessive overlaps along ridges may be cut off and used along the gutter.
DELTA®-MAXX WD benefits from the proven long-range experience of DELTA®-MAXX WD. It is very robust, highly tear-resistant, and extremely step-through safe.
Absorbent polyester cloth with a waterproof, vapour-permeable PU coating and a self-sealing edge.
Class E, EN 13501-1
ca. 450/300 N/5 cm, EN 12311-1+2
Class W 1, EN 13859-1+2
approx. 0,15 m, EN ISO 12572
-40 °C to +80 °C
|Short-term maximum temperature load of the material||
approx. 190 g/m²
approx. 14 kg
Permanently elastic special-rubber cartridge adhesive for outside application on roofs.
Single-faced tape for sealing nail penetrations between counterbattens and sarking sheets
DELTA®-MULTI-BAND serves to seal and repair all DELTA® roof sheets. Thus, the adhesive tape perfectly complements each and every DELTA® roof membrane.
DELTA®-FLEXX BAND consists of a stretchable combination of butyl rubber adhesive and a special spunbond.Great adhesion and stretchability. Suitable even for nooks and crannies. For roof systems.
© Dörken GmbH & Co. KG · A member of DÖRKENGROUP · DELTA® is a registered trademark of Ewald Dörken AG, Herdecke, Germany.