DELTA®-MAUERWERKSSPERRE

Schutz des Mauerwerks gegen aufsteigende Feuchtigkeit.

DELTA®-MAUERWERKSSPERRE

The barrier against rising damp – horizontal masonry separation within the meaning of DIN 18533

DELTA®-MAUERWERKSSPERRE is a durable and highly flexible damp-proof course made of polyolefin. It will also serve as a moisture barrier under a wash floor. DELTA®- MAUERWERKSSPERRE is 0.4mm thick and easy to roll up and apply. DELTA®-MAUERWERKSSPERRE has a non-slip profile on both sides for optimum bonding with mortar. The sheet is bitumen-compatible, rot-proof, and UV-stabilised. It is highly flexible even at low temperatures, so that the sheet remains permanently free from cracks. DELTA®-MAUERWERKSSPERRE is installed in a single layer. Contact surfaces with mortar belonging to category II or III (DIN 1053-1) should be covered thickly enough to make a horizontal surface without irregularities. The sheet should be pressed firmly into the mortar. At joints, sheets should overlap by at least 20cm to ensure optimum protection from moisture. The sheet should be wide enough to rule out any chance of moisture bridges forming on either side of the rising wall.

 
DELTA®-MAUERWERKSSPERRE in der Anwendungzoom
 

Technical data: DELTA®-MAUERWERKSSPERRE

 
 
Material

Polyolefin, black with antiskid profiling, bitumen-compatible.

Thickness

approx. 0,40mm

Accessories for DELTA®-MAUERWERKSSPERRE

 
 

Download

Keine Downloads vorhanden 

 
 

Contact

Dörken GmbH & Co. KG
 
 

Dörken GmbH & Co. KG
Wetterstraße 58
D-58313 Herdecke
Germany

Tel          +49 23 30/63-0
Fax         +49 23 30/63-355
E-Mail    bvf@doerken.de

Dörken worldwide

Dörken Worldwide

Our social media channels

 

© Dörken GmbH & Co. KG · A member of DÖRKENGROUP · DELTA® is a registered trademark of Ewald Dörken AG, Herdecke, Germany.

Profi-ChatBaufragen.de