Roofing membrane, Roofing membrane for hard sheathing, Façade membrane for closed joints DELTA®-VENT X PLUS

Highly tear-resistant universal membrane (approx. 520/520N/5cm).
Also for roofs with large batten width according to DIN 4426.

DELTA®-VENT X PLUS can be used as a pre-covering under metal roofing, slate, fibre cement roof panels or shingles. Also usable as a façade track behind closed joints!

With integrated self-adhesive edges.

    smallRetina 06:50:04
    Verarbeitung von DELTA®-VENT X PLUS
    smallRetina 06:50:04
    Verarbeitung von DELTA®-VENT X PLUS
    smallRetina 06:50:04
    Selbstkleberand von DELTA®–VENT X PLUS
    smallRetina 06:50:04
    DELTA®-VENT X PLUS in der Anwendung

Advantages

  • Highly tear-resistant
    Thanks to its four layers, DELTA®-VENT X PLUS offers a higher-than-average tear strength of approx. 520/520N/5cm lengthwise and also in a transverse direction. The membrane creates the highest level of security during processing - even on roofs with large batten widths according to DIN 4426.
  • Bonding with future-oriented strip system
    DELTA®-VENT X PLUS enables a reliable moisture protection through the strip system in the upper adhesive area. Each individual strip creates a barrier against running water or possibly ascending humidity in the overlap area and so can create additional security. It is not necessary to cover the adhesive areas down to the centimetre.
  • Product may also be used as temporary cover
    DELTA®-VENT X PLUS meets all the requirements of the ZVDH regulations and can be used as a temporary cover in combination with the system accessories of DELTA®.

Application

DELTA®-VENT X (PLUS) is a robust universal membrane that can be used as a roofing membrane to protect roofs with covering and as a separation layer under metal coverings, slate, fibre cement roof panels or shingles.

It can also be used as a façade membrane behind façade cladding with closed joints.

The membrane also increases work safety on roofs with large battens according to DIN 4426.

Technical data

Material Four-layer pitched roof membrane made of tear-resistant, diffusion-open fabric reinforcement and a PP spunbonded film combination with integrated adhesive zones on both edges.
ZVDH product data sheet Class UDB-A / USB-A
Reaction to fire Fire class E, according to the standard EN 13501-1
Tensile strength approx. 520/520 N/5 cm, standard EN 12311-1
Watertightness Watertight W 1, EN 13859-1 + 2
Sd-value approx. 0,05 m
Servicetemperature range from -40 °C to +80 °C
Weight approx. 160 g/m²
Roll weight approx. 12 kg
Roll size 50 m x 1.50 m

Accessories

Download

Contact

smallRetina 06:50:05 mediumAlias 06:50:05 large 06:50:05 xlarge 06:50:05

Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.