Roofing membrane, Roofing membranes for hard sheathing, Façade membrane for closed joints delta^®-vent s (plus)

Economical and tear-resistant roofing membrane. Protects roofs against moisture and other harmful environmental influences. Optimized applications on rough wooden sheathing.

Can be used as a decking under metal roofing, slate, fibre cement roofing panels or shingles. It can also be used as a façade membrane behind façade cladding with closed joints.

01 /09

DELTA®-VENT S PLUS in der Anwendung als Schalungsbahn

DELTA®-VENT S PLUS in der Anwendung als Fassadenbahn

DELTA®-VENT S PLUS in Kombination mit Holzweichfaserplatten

Advantages

Strong connection
Wide adhesive zones on both edges of DELTA^®-VENT S PLUS ensure an easy and cost-effective installation. The binding sticks immediately and gets even stronger. Each individual strip in the upper adhesive area forms a barrier and thus provides additional security against any ascending moisture in the overlapping areas.
Easy application
DELTA^®-VENT S (PLUS) is a three-layer membrane, which makes it particularly robust. The surface weight is approx. 150g/m², DELTA-VENT S (PLUS) is thus easy to apply and still offers a high resistance to mechanical loads. Fast unwinding without distortion or dents. The matt surface stops annoying reflections.
DELTA^®-VENT S (PLUS) and wood fibre insulation: A safe system. A strong combination
Ideal diffusion-open airtight layer for underneath the wood fibre insulation.
Used ss an additional windproof roofing membrane (UDB-A) it offers double protection for more structured roofs.
Equipped with DELTA^®-AMS und DELTA^®-BiCo technologies.

Application

DELTA^®-VENT S (PLUS) is a robust universal membrane that can be used to protect roofs with covering and as a roof membrane (separation layer) under metal coverings, slate, fibre cement roof panels or shingles.

It can also be used as a façade membrane behind façade cladding with closed joints.

Reference

DELTA^®

LA CASA VERDE CO2.0
IT

The green house CO2.0, a project of the Editerra-Edilana district, earned the prestigious SIF AWARD 2012 sustainability prize. The product DELTA^®-VENT S was used for the protection of the elegantly curved roof construction

Technical data

Material	three-layer roofing membrane made of tear-resistant, vapor-permeable PP-spunbonded-film combination with integrated adhesive zones on both edges. As DELTA^®-VENT S without adhesive zones.
ZVDH product data sheet	Class UDB-A / USB-A
Reaction to fire	Fire class E, according to the standard EN 13501-1
Tensile strength	approx. 310/260 N/5 cm, standard EN 12311-1
Watertightness	Watertight W 1, EN 13859-1 + 2
Sd-value	approx. 0,02 m
Servicetemperature range	from -40 °C to +80 °C
Short-term maximum temperature load of the material	+100 °C
Resistance against driving rain	Passed, driving rain test of sarking and sarking tracks - Technical University TU Berlin
Enhanced ageing resistance requirements	Passed, ZVDH product data sheet, Table 1
Weight	approx. 150 g/m²
Roll weight	approx. 11 kg
Roll size	50 m x 1.50 m

Accessories

DELTA^®-MULTI-BAND

Universal, highly aging-resistant adhesive tape with maximum adhesive strength both for indoor and outdoor areas on roofs.

DELTA^®-SCHAUM-BAND

One-sided adhesive nail sealing tape from the roll for the secure sealing of nail spots.

DELTA^®-THAN

Permanent elastic cartridge adhesive for outdoor use. Offers maximum security in the connection area.

DELTA^®-FLEXX BAND F100

Connection and sealing tape with high adhesive strength and high flexibility at the same time - for details both outside and inside.

Abdichten einer Kabeldurchführung mit DELTA®-FLEXX BAND FG 80 / FG 150

DELTA^®-FLEXX-BAND FG 80/150

Adhesive tape for sealing the most difficult, three-dimensional details inside and outside, such as for example corners, edges, and openings.

DELTA^®-HF PRIMER

Solvent-free, universal primer for different substrates. Improves the adhesive properties of the surfaces to be bonded.

DELTA^®-DICHT BAND

Single-sided adhesive nail sealing tape made of bitumen/rubber compound with PE cover film.

Download

PDF | 523 kB

Declaration of Performance DELTA^®-VENT S

Contact

Would you like information on detailed product properties, use cases or other technical topics?
Then feel free to contact our application department on +49 2330 63 578 or atabvf@doerken.de.

Do you have questions about prices, availability or the status of your order?
Our sales service will help you with these matters on +49 2330 63 636 or membranes@doerken.de.

Contact form

You can also use our contact form to send us your request.

International contact

Here you will find all the contact details of our international DÖRKEN Membranes subsidiaries and importers.

Roofing membrane, Roofing membranes for hard sheathing, Façade membrane for closed joints delta®-vent s (plus)

Advantages

Application

Reference

LA CASA VERDE CO2.0 IT

Technical data

Accessories

DELTA®-MULTI-BAND

DELTA®-SCHAUM-BAND

DELTA®-THAN

DELTA®-FLEXX BAND F100

DELTA®-FLEXX-BAND FG 80/150

DELTA®-HF PRIMER

DELTA®-DICHT BAND

Download

Brochure DELTA®-VENT S PLUS

Technical data sheet DELTA®-VENT S PLUS

Technical data sheet DELTA®-VENT S

Declaration of Performance DELTA®-VENT S PLUS

Declaration of Performance DELTA®-VENT S